Date Imprinting - Minolta DiMAGE F200 Instruction Manual

Date imprinting

The date of recording can be printed directly on the image. The imprinting function must be activated
before the image is taken. Once activated, the date will continue to be imprinted until the function is
reset; a yellow bar is displayed behind the frame counter on the moni-
tor to indicate the imprinting function is active. Date imprinting is acti-
vated with auto-recording mode menu (p. 44) and with the custom 2
section of the multi-function recording menu (p. 56).
Camera Notes
Every time a still image is recorded, it is stored with an exif tag that contains the date and time
of recording as well as shooting information. This information can be viewed with the camera in
the Quick View or playback mode, or on a computer with the DiMAGE Viewer software.
Date-imprinting indicator
The date is imprinted in the lower right corner of
the image when viewed horizontally. It is printed
directly on the photograph writing over the image
information. The date can be imprinted in three for-
mats: year / month / day, month / day / year, and
day / month / year. The date and date format are
set in the custom 2 section of the setup-mode
menu (p. 98).
49