Minolta DiMAGE F200 Instruction Manual page 119

Number of prints in the print run.
:move :sel.
The display button switches between the
single frame and index playback formats.
Print file?
Number of prints: 7
Yes No
Printing finished.
OK
Connect the camera to the printer using the camera's USB cable. The larger
plug on the cable is connected to the printer. Lift the rubber cover and insert
the smaller plug of the cable into the camera. Turn the camera on with the
mode dial; the dial can be set to any position. The USB Direct Print screen will
be displayed.
Strike through indicates unprintable file type.
Number of copies of the displayed image.
:print
The number of prints in the print run are displayed on the LCD moni-
tor. Use the left/right keys to highlight "Yes," and press the center of
the controller to start printing.
Once printing begins, the operation can be canceled by pressing the
center of the controller. The printing finished message will indicate
the end of the operation; turn the camera off to end the routine.
Use the left/right keys of the controller to dis-
play the image to be printed.
Press the up key to select the number of
copies to be printed. A maximum of nine
copies can be selected. To deselect an image
for printing, press the down key until the num-
ber of copies reaches zero.
Repeat the previous steps until all the images
to be printed are selected. Press the central
button of the controller to begin the printing
routine.
119