Notes on movie recording
In movie recording, some functions can be used, some are fixed, and some are disabled, see chart.
Image size, white balance, and movie mode can be selected with the movie menu.
When the red low-battery
indicator appears (p. 16),
power is insufficient for movie
recording. The writing speed
of the memory card in use
may prevent an entire movie
clip from being recorded.
Remote movie and audio recording with the RC-3
The RC-3 remote control (sold separately) can be
used to record movie clips and audio tracks (p. 75)
from up to 5m (16ft) away. Simply point the remote
control toward the camera and use the release or
delay button to start and stop the recording.
When the release or delay button is pressed, the
self-timer lamp (1) will blink before the camera
starts to record; there is a two second delay when
the delay button is used before the lamp glows to
indicate recording. Both buttons will stop the
recording when pressed; the self-timer lamp will
blink to confirm the operation. The remote control
may not operate with backlit subjects or under flu-
orescent light.
Focus mode
Autofocus area
Exposure mode
Metering mode –
Camera sensitivity
Digital zoom –
Exposure compensation –
Flash –
Digital subject programs –
Emitter window
–
Single-shot AF (fixed)
–
Area AF focus frames (fixed)
–
Program (fixed)
Multi-segment (fixed)
–
Auto (fixed)
4X (fixed)
Available (p. 51)
Disabled
Disabled
Delay button
Release button
1
77