The Position Of Thread Guide Bar; Attaching The Spool Holder Cap And Net - Janome 204D Instruction Manual

Janome 204D Instruction Manual
2
[1] [2]
1
[1]
[2]
www.aaasewing.com

The Position of Thread Guide Bar

1
[1] Pull the thread guide bar up as far as it will go.
[2] Turn the thread guide bar so that the thread
3
4

Attaching the Spool Holder Cap and Net

3
[1] When you use a small thread spool, pull out the
4
2
[2] If the thread slips down from the spool
* The spool holder cap and net are optional
2
1
guides are right above the spool pins.
1
Thread guide bar
2
Thread guide
3
Stoppers
4
Spool pin
spool holder from the spool pin. Then place the
spool with its slit side up, and put the spool
holder cap on top of it.
1
Spool holder
2
Spool pin
3
Spool holder cap
4
Slit
during threading and/or sewing, put a net on the
spool as illustrated to prevent jamming.
accessories.
1
Net
2
Spool pin
204D Owners Manual/ User Guide
Janome 204D serger
7