Removing The Presser Foot; Attaching The Presser Foot; Adjustment Of Foot Pressure - Janome 204D Instruction Manual

Janome 204D Instruction Manual
2
1
3
1
4
2 mm
3
www.aaasewing.com
3
4
2
2
1
2

Removing the Presser Foot

[1] Turn off the power switch and unplug the
machine.
[2] Raise the needle and the presser foot.
[3] Press the lever located on the back of the foot
holder. The presser foot will drop off.
1
Needle
2
Presser foot lifter
3
Foot holder
4
Lever

Attaching the Presser Foot

[1] Turn off the power switch and unplug the
machine.
[2] Place the presser foot so that the pin on the foot
lies just under the groove of the foot holder.
[3] Lower the foot holder to lock the foot into place.
[4] Raise the presser foot lifter to check that the
presser foot is secure.
1
Groove
2
Pin
3
Lever

Adjustment of Foot Pressure

It is not necessary to adjust the presser foot
pressure for normal sewing.
When you sew heavy or lightweight fabrics, turn the
adjusting screw:
- clockwise for heavyweight fabric.
- counterclockwise for Iightweight fabric.
* For normal sewing, set the adjusting screw so
that its head comes out above the top of the
machine by 2 mm.
See the illustration.
1
To decrease
2
To increase
3
Adjusting screw
4
Top of the machine
204D Owners Manual/ User Guide
Janome 204D serger
9