Navigating The Pictbridge Menu - Konica Minolta DIMAGE DiMage Z5 Instruction Manual

Navigating the PictBridge menu

Pressing the menu button (1) turns the menu on and off. The four-way keys of the controller (2)
move the cursor in the menu. Pressing the central button of the controller enters a setting.
Activate the menu with the menu button.
Use the left/right keys of the controller to highlight the appropriate menu tab; the menu
changes as the tabs are highlighted.
Use the up/down keys to scroll through the menu options. Highlight the option whose
setting needs to be changed.
With the menu option highlighted, press the right controller key; the settings are dis-
played with the current setting highlighted. If "Start" is displayed, press the center of the
controller to continue.
Use the up/down keys to highlight the new setting.
Press the central button of the controller to select
the highlighted setting.
Once a setting has been selected, the cursor will return to the
menu options and the new setting will be displayed. To return
to the PictBridge screen, press the menu button. Read the fol-
lowing sections on information on the menu options.
116 Data-transfer mode
Batch print
Index print
Batch print
Batch print in section 1 selects all still images on the memory card for printing. Two options are
available:
All frames- to print all images on the card. A screen opens so the number of copies of each image
can be specified. A maximum number of fifty images can be printed.
Reset - to cancel changes made with the batch print option or with the print selection screen.
Index print
An index print of all still images on the memory card can be made. The quality and size of the print
can be specified with the camera menu. The number of images per page varies with the printer. The
print-setup confirmation screen is displayed before the print routine starts.
2
1
The options that can be changed vary with the printer.
– –
– –
117