Manual Installation - Konica Minolta DIMAGE DiMage Z5 Instruction Manual

Manual Installation

To install the Windows 98 driver manually, follow the instruc-
tions in the connecting-the-camera-to-a-computer section
on page 103.
When the camera is plugged into the computer, the operat-
ing system will detect the new device and the add-new-
hardware-wizard window opens. Place the DiMAGE Viewer
CD-ROM in the CD-ROM drive. Click "Next."
Choose the recommended search for a suitable driver.
Click "Next."
Choose to specify the location of the driver. The browse
window can be used to indicate the driver location. The
driver should be located in the CD-ROM drive at
:\Win98\USB. When the location is shown in the window,
click "Next."
106 Data-transfer mode
The add new hardware wizard will confirm the location of
the driver. The letter designating the CD-ROM drive will
vary between computers. Click "Next" to install the driver
in the system.
One of three drivers may be located: MNLVENUM.inf,
USBPDR.inf, or USBSTRG.inf.
The last window confirms the driver has been installed.
Click "Finish" to close the add new hardware wizard.
Restart the computer.
When the my-computer window is opened, a new remov-
able-disk icon is displayed. Double click on the icon to
access the camera's memory card; see page 102.
107