Tait TSM4 User Manual

TSM4 Remote Speaker Microphone
User Guide
T03-00045-PCAA/PCEA
Key Features
Rotatable
lapel clip
Function
button
Microphone
Speaker
Push-to-Talk
button (PTT)
Receive-only
Function
3.5 mm
button
audio jack
Radio Connector
Connector
cable
Transmit audio from the TSM4
Hold the TSM4
5-10 cm (2-4 in)
from your mouth.
1. Press and hold
the PTT button.
2. Talk into the
microphone.
Important Safety Information
Please read this guide carefully before you
use the TSM4. Please also see the Safety
and Compliance booklet (MTA-00011-xx)
that shipped with your Tait radio.
It explains how to use Tait devices safely.
Connect to a Radio
Loosen the Remove the
1 2
cover screw. cover.
Receive audio on the TSM4
To adjust the volume to a comfortable level,
turn the volume control knob on the radio.
Listening at high volume can damage
your hearing.
Compatible Radios
Make sure you only use the TSM4 with these Tait
radio models:
TP9400 / 9600 / 9800

TP9300 / 9500 / 9700

TP3000

The TSM4 is NOT compatible with Tait
Intrinsically Safe (IS) radio models.
Connecting the TSM4 to the radio disables the
radio speaker.
Attach TSM4 Tighten theTSM4
3 4
connector. connector screw.
Compatible Earpieces
Type of
Jack Part Number
earpiece
Right-angled T03-00086-0101
In-ear
Straight T03-00086-0102
Right-angled T03-00086-0201
C-hook
Straight T03-00086-0202
Right-angled T03-00086-0301
D-ring
Straight T03-00086-0302
Contact your Tait dealer for other earpiece
options.
G.H.C
Compatible Radio Firmware
To use the front function button, you need:
Radio Programming
Firmware
Series Application
TP9400
P25 (XPA)
P25 v2.22 / later
TP9600
v2.22.1.283 / later
TP9800
TP9300
DMR (XPA)
DMR v2.30 / later
TP9500
v2.30.1.2 / later
TP9700
TP3000 v3.00.20 / later v2.00.08 / later
Contact your Tait dealer if you need to update
your radio firmware or programming application.
Recommended Wearing Position
C-hook
In-ear D-ring