Konica Minolta DiMAGE A2 Instruction Manual page 150

The last window will confirm the driver has
been installed. Click "Finish" to close the
add new hardware wizard. Restart the
computer.
150
D -
ATA TRANSFER MODE
The add new hardware wizard will confirm
the location of the driver. One of three
drivers may be located: MNLVENUM.inf,
USBPDR.inf, or USBSTRG.inf. The letter
designating the CD-ROM drive will vary
between computers. Click "Next" to install
the driver in the system.
When the my-computer window is opened, a
new removable-disk icon will be displayed.
Double click on the icon to access the camera's
memory card; see page 152.