Manually Adjusting The Exposure; Exposure Adjustment - Canon DC20 Instruction Manual

Manually Adjusting the Exposure

More Recording Options
Adjust the exposure when a subject is underexposed (for example, when backlit subjects
appear too dark in the image) or overexposed (for example, when recording subjects
under very strong light and they appear too bright or glaring in the image).
Exposure Lock
1. Set the camcorder to a recording mode (
and move the mode switch to a position other than
Exposure cannot be adjusted in the Fireworks recording program (SCN).
2. Push the omni selector (
• The exposure adjustment indicator
the screen.
• If you operate the zoom during exposure lock, the brightness of the image may
change.
• Pushing the omni selector (
camcorder to the previous setting.

Exposure Adjustment

During exposure lock:
Adjust (
The adjustment range depends on the brightness of the picture at the time you locked the
exposure.
Downloaded From VideoCamera-Manual.com Manuals
) again will cancel the exposure lock and return the
) the brightness of the image as required.
) towards EXP.
and the neutral value "±0" appear on
Mode switch
Omni Selector/EXP button
or
.
E
)
51