Canon DC20 Instruction Manual page 125

Problem
Sound is distorted.
A vertical light bar appears on
the screen.
Viewfinder picture is blurred.
Cannot edit or delete scenes.
Cannot add scenes to the
playlist.
Cannot divide the scene.
Cannot edit the disc title.
Cannot create a Photomovie
scene.
Playback
Problem
Pressing the playback button
does not start playback.
During playback there is
video noise, the sound is
distorted or the disc cannot be
read.
Image will not appear on the
TV screen.
There is a brief stop between
scenes.
Disc is running, but image will
not appear on the TV screen.
No sound from the built-in
speaker.
Downloaded From VideoCamera-Manual.com Manuals
When recording near loud sounds (such as fireworks or
concerts), sound may become distorted. This is not a
malfunction.
Bright light in a dark scene may cause a vertical light bar
(smear) to appear. This is not a malfunction.
Adjust the viewfinder with the dioptric adjustment lever.
Remove the disc protection.
Scenes cannot be deleted in a DVD-R disc or a DVD-RW disc
recorded in VIDEO mode.
You cannot edit or delete scenes on a disc that was protected
in another digital device.
The disc is full (" END" flashes on the screen). Delete some
recordings (DVD-RW in VR mode) to free some space or
replace the disc.
You cannot edit or delete scenes on a disc that was protected
in another digital device.
You cannot add a title to a DVD-R disc after it was finalized.
You cannot add recordings or edit the disc title on a DVD-RW
disc after it was finalized. Unfinalize the disc first.
You may not be able to edit the title if you entered it with
another digital device.
Disc is protected. Cancel the disc protection or replace the
disc.
There are no still images recorded on the disc.
The disc is full (" END" flashes on the screen). Delete some
recordings (DVD-RW in VR mode) to free some space or
replace the disc.
Set the camcorder to
Load a disc.
You may not be able to play with this camcorder discs
recorded or edited with other DVD recorders or computer DVD
drives.
Verify that the disc is inserted with the label side facing up.
The disc is dirty. Clean the disc with a soft lens-cleaning cloth.
You may not be able to play with the camcorder discs
recorded or edited with other DVD recorders or computer DVD
drives.
Check the connections and make sure the TV or VCR is set to
the correct input signal.
Depending on the DVD player, there might be a very short
stop between scenes during playback.
TV/VIDEO selector on the TV is not set to VIDEO. Set the
selector to VIDEO.
You attempted to play back or dub an incompatible disc. Stop
playback/dubbing.
Speaker volume is turned off. Adjust the volume from the
[SYSTEM SETUP] menu in the
Solution
Solution
.
mode.
–
E
–
24
90
–
–
31
87
–
98
101
–
90
–
31
87
39
31
–
31
133
–
102
–
102
–
43
125