Minolta Maxxum 9 Instruction Manual page 51

CUSTOM FUNCTIONS
Cust 13 — Meter / Data Panel Illuminator Display Duration
• Selecting longer display durations reduces battery performance.
1 – 5 sec
2 – 10 sec
3 – 30 sec
Cust 14 — AF Area Display
• Press and hold the AF button to display the focus area LEDs.
• Pressing the lens focus hold button does not display the focus area LEDs.
1 - Focus Area LEDs display the active
2 – Focus Area LEDs display the active
3 – Local focus areas display only when the
AF button is pressed.
98
focus area for 0.1 sec after the
focus locks.
focus area for 0.4 sec after the
focus locks.
Cust 15 — Eyestart Switch
Dial-lock - Disengages the control dials to prevent an accidental turn of the control
dials from changing the exposure settings.
1 – Turns Eyestart on and off (p. 76).
2 - Turns Dial-lock on and off. Eyestart
3 - Turns Dial-lock on and off. Eyestart
Cust 16 — Release Lock (Lens)
1 – Shutter cannot be released if a lens is not attached.
• – – appears (blinks) in the data panel when the shutter-release button is pressed.
2 – Shutter can be released if a lens is not attached.
Use when mounting the lens to a non-coupling lens mount (telescope, microscope
etc.).
Cust 17 — AF Drive Speed
1 – Speed priority
2 – Silent drive
• Autofocus drive speed will be slower than setting 1.
is always on.
is always off.
99