Minolta Maxxum 9 Instruction Manual page 45

DATA MEMORY
Overwriting
appears in the data panel before the data for
the first exposure in Area 1 is overwritten.
• disappears after the first exposure.
• Old data is erased one frame ahead of the current frame.
Area appears only when the film area changes from 7 to 1
and disappears after the data from the first exposure is
recorded.
86
Recalling Data
1. Open the control panel door, then
•
2. Turn either control dial until
3. Press the adjust button to view the
•
press the data-memory button.
and the current data memory mode appear
in the data panel.
and the desired data area appears in
the data panel.
first data area.
blinks in the data panel.
Continued on the following page
87