Getting Started; Power On/Off; Product Service - Cobra XRS 9940 Operating Instructions Manual

12 band maximum performance digital radar/laser detector with super-xtreme range superheterodyne technology
Hide thumbs Also See for XRS 9940:
Table of Contents

Advertisement

Spreads.qxd
11/9/07
12:19 PM

Getting Started

Your Detector

Power On/Off

On-Off/Volume Control
Rotate clockwise (away from you)
To Turn on the Unit and Adjust the Audio Volume
Tone
Rotate the On-Off/Volume
control clockwise (away
from you).
Testing, then
three beeps
Unit will cycle through
Power On / Self Test and
display the Standby screen
when complete. Standby
screen will show City or
None
Highway icon. Car Battery
Voltage, Compass, and
IntelliMute will also show if
turned on (see note).
Display changes to Display
None
Timeout after 30 seconds
(factory default).
NOTE
When the system is first turned on from new, only the City or Highway icon will show on
the screen because the Show Compass, IntelliMute and Show Car Battery Voltage functions
are set to off at the factory. See pages 14, 16 and 19 to turn these functions on.
NOTE
In some vehicles, power is supplied to the cigarette lighter even while the ignition is off. If
this is the case with your vehicle and you have turned the SmartPower off, you should
turn off or unplug your detector when parking for lengthy periods. Cobra recommends
leaving SmartPower at the factory setting, which is on. See page 18.
English
6
Page 6
Voice
Visual Display
Testing, then
three beeps
System Ready
Voice Alert
13.2V
None

Product Service

Customer Assistance
Product Service
For any questions about operating or installing this new Cobra product, or if
parts are missing...PLEASE CALL COBRA FIRST...do not return this
product to the store. See customer assistance on page A1.
If this product should require factory service, please call Cobra before
sending the product. This will ensure the fastest turn-around time on any
repair. If Cobra asks that the product be sent to its factory, the following
must be furnished to have the product serviced and returned:
1. For Warranty Repair include some form of proof-of-purchase, such as
a mechanical reproduction or carbon of a sales receipt. Make sure the
date of purchase and product model number are clearly readable. If the
originals are sent, they cannot be returned;
2. Send the entire product;
3. Enclose a description of what is happening with the product. Include
a typed or clearly printed name and address of where the product is
to be returned, with phone number (required for shipment).
4. Pack product securely to prevent damage in transit. If possible,
use the original packing material;
5. Ship prepaid and insured by way of a traceable carrier such as
United Parcel Service (UPS) or Priority Mail to avoid loss in transit to:
Cobra Factory Service
Cobra Electronics Corporation
6500 West Cortland Street
Chicago, Illinois 60707 U.S.A.;
6. If the product is in warranty, upon receipt of the product it will
either be repaired or exchanged depending on the model. Please
allow approximately 3 – 4 weeks before contacting Cobra for status.
If the product is out of warranty, a letter will automatically be sent
with information as to the repair charge or replacement charge.
For any questions, please call 773-889-3087 for assistance.
Nothing Comes Close to a Cobra
®
31

Advertisement

Table of Contents
loading

Table of Contents