Table of Contents
Advertisement
Installation
Your Detector
Dashboard Mounting
1.
Place the detector on the dashboard to find a location
where the unit has a clear, level view of the road.
The angle can NOT be adjusted after mounting.
2. Remove the paper backing from
one side of the hook-and-loop
fastener.
3. Attach the pad to the dashboard
at your chosen location and
remove the
backing.
4. Attach the detector to the hook-
and-loop fastener.
You can remove and reattach
the unit as
often as you like.
5. Plug the power cord
into the detector.
6. Plug the cigarette lighter
adapter on the power
cord into your vehicle's
cigarette lighter.
4
English
other paper
Getting Started
Your Detector
Getting Started
Power On
h
X K Ka V S
On-Off/
Volume Control
Rotate clockwise
(away from you)
To Turn On the Unit and Adjust the Audio Volume
Rotate the On-Off/
Tone
Volume control
Three beeps
clockwise (away
from you).
NOTE
In some vehicles, power is supplied to the cigarette lighter even while the ignition is
Off. If this is the case with your vehicle, you should turn Off
or unplug your detector when parking for lengthy periods.
Auxiliary Audio Jack
The Auxiliary Audio Jack can be used to connect external speakers in environments
with high ambient noise levels. The internal speaker will
be disconnected. (This uses a mini stereo audio connector.)
•
Visual Display
h
appears in the display
indicating that the power
is On
•
Auxiliary
Audio Jack
5
Nothing Comes Close to a Cobra
®
Hide quick links:
Advertisement
Table of Contents
