Getting Started; Notice; Intro; Customer - Cobra 14 BAND XRS 878 Operating Instructions Manual

High-performance digital radar/laser detector with xtreme range superheterodyne technology
Table of Contents

Advertisement

Installation
Your Detector

Intro

Operation

Customer

Warranty

Assistance

Dashboard Mounting
1.
Place the detector on the dashboard to find a location
where the unit has a clear, level view of the road.
Secondary Icons
The angle can NOT be adjusted after mounting.
2. Remove the paper backing
from one side of the hook-
and-loop fastener.

Notice

3. Attach the pad to the
dashboard at your chosen
location and remove the
other paper backing.
4. Attach the detector to the
hook-and-loop fastener.
You can remove and
reattach the unit as
often as you like.
5. Plug the power cord
into the detector.
6. Plug the cigarette lighter
adapter on the power
cord into your vehicle's
cigarette lighter.
English
4

Getting Started

Your Detector
Intro
Operation
Customer
Getting Started
Assistance
Power On
h
X K Ka V S
Secondary Icons
On-Off/
Volume Control
Rotate clockwise
(away from you)
Main Icons
Notice
To Turn On the Unit and Adjust the Audio Volume
Rotate the On-Off/
Tone
Intro
Operation
Customer
Warranty
Assistance
Volume control
Three beeps
clockwise (away
from you).
Secondary Icons
NOTE
In some vehicles, power is supplied to the cigarette lighter even while the ignition
Notice
is Off. If this is the case with your vehicle, you should turn Off or unplug your
detector when parking for lengthy periods.
Auxiliary Audio Jack
The Auxiliary Audio Jack can be used to connect external speakers in
environments with high ambient noise levels. The internal speaker will
be disconnected. (This uses a mini stereo audio connector.)
Warranty
Voice
Visual Display
h
Testing, then
appears in the
three beeps
display indicating
that the power
System Ready, then
is On
Voice Alert
Auxiliary
Audio Jack
Nothing Comes Close to a Cobra
®
5

Advertisement

Table of Contents
loading

Table of Contents