Table of Contents
Advertisement
placed on the charger and stored, while plugged-in, indefinitely with no
performance degradation. In fact, leaving the light stored on its charger will
help maintain its maximum performance.
To Charge:
1. Insert the connector side of the flashlight into the charger unit. This is
the side opposite the side button on the flashlight. The flashlight will
automatically begin charging when it "snaps" into the charger unit.
2. When the flashlight is inserted in the charger unit, the blue light at the
top of the charger will begin to blink. As the flashlight charges, the
blinking will increase in speed until the blue light is solid, indicating
that the flashlight has reached a full charge and is ready for use. The
flashlight can be removed from the charger unit at any time during the
charge cycle without negative effects to the flashlight, charger, or long
term performance. Removing the flashlight before the light turns solid
results in an incomplete charge cycle and shorter run time.
Note: High Temperature Charging
Your flashlight Charger has automatic temperature overload protection.
Charging in high temperatures (defined as 120 degrees Fahrenheit or more)
will increase charge time slightly. This is normal and will ensure a prolonged
life of your flashlight.
PC3.300 User Guide
5
Advertisement
Table of Contents
