Light for Life PC3.300 User Manual page 13

Q: My 12 volt AC volt adapter won't work with my charger?
A: The PC3.300 is designed to operate with the 5.11 AC adapter. Please
see the 5.11 web site or contact our customer service team to
purchase a 5.11 AC adapter. If using another 12V adapter, please
ensure that your adapter is rated for a minimum of 7 amps. Many
typical AC adapters are under 7 amps.
Q: My flashlight won't charge when my vehicle is not running. What do
I do?
A: It is recommended that your vehicle is running during the 90 second
recharge cycle for the flashlight. For best results it is recommended
that the flashlights first charge cycle be inserted into the charger for 24
hours. Once the original process is complete, the flashlight will resume
its normal recharge cycle of 90 seconds and run-time performance
range.
Q: With the advanced capacitor technology, am I able to leave the
flashlight on the charger when not in use? Would this cause any
problems in longevity of the flashlight's charging capabilities?
A: For best results it is recommended that the PC3.300 remain on the
charger when not in use. The light is designed to be placed on the
charger indefinitely with no performance degradation.
Q: How long does it take for the Light For Life™ PC3.300 to recharge?
A: The Light For Life™ PC3.300 only take 90 Seconds to recharge fully.
Q: How does the Light For Life™ PC3.300 re-charge so fast?
A: The reason our flashlight recharges so fast is because of the advanced
capacitors in the light paired with FlashPoint™ Power Technology.
An advanced capacitor does not recharge by means of a chemical
reaction, thus enabling it to recharge very quickly. FlashPoint™ Power
Technology carefully manages the energy for a very fast charge with
no impact on the capacitors.
PC3.300 User Guide
13