Timer; Time-Out Timer; Hang-Timer - Vertex VXR-5000 User Manual

VXR-5000
Channel Editor Window
Frequency
Channel data (TX and RX) must be entered
individually for channels 1
~
8, as shown
above. Channels are enabled/disabled by
toggling the
SPACE
bar. Frequencies are en-
tered using the numeric keypad or top-row
keys. Up to eight digits can be entered and
displayed, however, frequencies will be
rounded to the nearest channel-step (as set in
the environment window). Confirm that the
frequencies entered are within the operating
range of the repeater version-type you are
programming.
Timer
Time-Out Timer, Hang-Timer and Penalty-
Timer settings for both repeater and remote-
base operation can be edited in this
menu(shown below). These affect overall sys-
tem operation, and therefore should be con-
figured according to user requirements.
• Time-Out Timer - this selects a maximum
time period for continuous transmission
(1
~
60 mins.), or is disabled by pressing
the
SPACE
bar.
• Hang-Timer - this controls how long the
repeater will remain keyed after a trans-
mitting station's carrier drops (stops
transmitting). Hang-Time can be adjusted
Timer Settings Window
3-6