LOADING THE FILM
• If the film tip extends beyond the index mark, push the excess film back
into the cartridge.
18
2. Place the film cartridge into the
film chamber. Extend the film
leader to the "FILM TIP" mark,
making sure it lays flat.
3. Close the back cover.
• The film automatically advances to the first frame
and
• If the film has been loaded improperly,
blink on the data panel and the shutter will
remain locked. Open the back cover and repeat
the loading procedure.
• Once the film is loaded, the back cover will lock preventing accidental
opening until the film is rewound (film chamber lock).
appears on the data panel.
will
19