Napoleon PRO285 User Manual page 14

14
WARNING!
the burner after cleaning it is very
EN
important that the valve/orifice
enters the burner tube before lighting
your gas grill. If the valve is not inside
the burner tube a fire or explosion
could occur.
WARNING!
conditions exist, do not use the gas grill. Have the part replaced by your Napoleon Gas Grill dealer or
qualified gas installer.
Cast Aluminum Lid: Your grill is equipped with a cast aluminum lid which will not rust and can easily be
refinished. The inside of the lid is raw aluminum, flow marks and releasing agent marks may be present,
this is not a defect but marks from the mold which is used in the manufacturing process.
Clean the lid periodically with warm soapy water. Although cast aluminum will not rust, high temperatures
and weathering can cause oxidation to occur on aluminum surfaces. This appears as white spots on
the casting. To refinish these areas, clean first and sand lightly with fine sandpaper. Wipe the surface to
remove any residue and paint with high temperature barbecue paint. Protect surrounding areas from
over-spray. Follow the manufacture's directions for curing.
www.napoleongrills.com
When reinstalling
Hose: Check for abrasions, melting, cuts, and cracks in the hose. If any of these