Panasonic KX-TGA930BX Installation Manual
Panasonic KX-TGA930BX Installation Manual

Panasonic KX-TGA930BX Installation Manual

Additional digital cordless handset

Advertisement

Quick Links

TGA930BX(e).fm Page 1 Thursday, March 13, 2008 6:25 PM
Thank you for purchasing a Panasonic digital cordless phone.
This unit is an additional handset compatible with the following
series of Panasonic Digital Cordless Phones:
KX-TG9311/KX-TG9331/KX-TG9341/KX-TG9361
You must register this handset with your base unit before it can
be used. This installation manual describes only the steps
needed to register and begin using the handset. Please read
the base unit's operating instructions for further details.
Charge the batteries for about 7 hours before initial use.
Please read this installation manual before using the unit and
save it for future reference.
Installation Manual
Additional Digital Cordless Handset
KX-TGA930BX
Model No.

Advertisement

Table of Contents
loading

Summary of Contents for Panasonic KX-TGA930BX

  • Page 1 Installation Manual Additional Digital Cordless Handset KX-TGA930BX Model No. Thank you for purchasing a Panasonic digital cordless phone. This unit is an additional handset compatible with the following series of Panasonic Digital Cordless Phones: KX-TG9311/KX-TG9331/KX-TG9341/KX-TG9361 You must register this handset with your base unit before it can be used.
  • Page 2: Supplied Accessories

    (220-240 V AC, 50/60 Hz) Hooks Note: L Use only the supplied Panasonic AC adaptor PQLV209BX. L The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.) – 2 –...
  • Page 3 L When replacing the batteries: – USE ONLY rechargeable Ni-MH batteries AAA (R03) size. – Do NOT use Alkaline/Manganese/Ni-Cd batteries. – We recommend using the Panasonic rechargeable batteries noted in the base unit’s operating instructions for replacement battery information. Press the notch on the handset cover firmly, and slide it in the direction of the arrow.
  • Page 4: Registering A Handset To A Base Unit

    TGA930BX(e).fm Page 4 Thursday, March 13, 2008 6:25 PM Registering a handset to a base unit Base unit: KX-TG9311/KX-TG9361 Press and hold {LOCATOR} for 4 seconds. (No registration tone) KX-TG9331/KX-TG9341 Press and hold {LOCATOR} for 4 seconds until the registration tone sounds.
  • Page 5: For Your Safety

    TGA930BX(e).fm Page 5 Thursday, March 13, 2008 6:25 PM Belt clip You can hang the handset on your belt or pocket using the supplied belt clip. N To attach the belt clip N To remove the belt clip For your safety To prevent severe injury and loss of life/property, read this section carefully before using the product to ensure proper and safe operation of your product.
  • Page 6 TGA930BX(e).fm Page 6 Thursday, March 13, 2008 6:25 PM electric shock. Confirm that smoke has stopped emitting and contact an authorized service center. Installation L To prevent the risk of fire or electrical shock, do not expose the product to rain or any type of moisture. L Do not place or use this product near automatically controlled devices such as automatic doors and fire alarms.
  • Page 7: Other Information

    TGA930BX(e).fm Page 7 Thursday, March 13, 2008 6:25 PM L Only use a compatible base unit (or charger) to charge the batteries. Do not tamper with the base unit (or charger). Failure to follow these instructions may cause the batteries to swell or explode. Other information L Operating the product near electrical appliances may cause interference.
  • Page 8 This material is copyrighted by Panasonic Communications Co., Ltd., and may be reproduced for internal use only. All other reproduction, in whole or in part, is prohibited without the written consent of Panasonic Communications Co., Ltd. © 2008 Panasonic Communications Co., Ltd. All Rights Reserved.

Table of Contents