Harman Kardon OMNI 10 Owner's Manual page 17

Select 'Manual setup'. (Note: WPS setup is covered
in a separate section on page 25)
Follow the on-screen instructions. First connect
your product to power and turn it on. Wait several
seconds for the unit to power on completely, then
press and hold the 'Reset' button on the bottom
panel of the unit for 5 seconds. The Link button
LED will flash quickly for several seconds, then
begin to pulse slowly. After this, flick the screen
to the left. This will display the next step.
Note: The navigation dots will be illuminated to
show you which screen you are viewing as you
move through the instructions.
14