Packet8 Virtual Office User Manual page 23

Supervised Transfer
From the Virtual Office phone while on a call
1. Press [Hold/New Call].
2. Call the desired extension (at this point the transferring person can toggle
between both parties by pressing the [Retrieve/Alternate] key).
3. Announce the reason for the call.
4. Press [More] [Join Parties] to connect the parties.
5. Hang up.
From any analog telephone while on a call
1. Press [Flash] [1].
2. Dial the number to transfer the call.
3. Announce the reason for the call.
4. Press [Flash] [4] to connect the parties.
5. Hang up.
To Transfer to the Auto-Attendant
Follow unsupervised transfer instructions and dial 444.
Three-party Conference
Three parties can be conferenced in on the same call. Multiple conference calls
can be added together from other extensions within Virtual Office. Conference
calls can be initiated by calling out of a call and conferencing in, but also by
adding a call waiting to an existing call.
To Call Out and Conference In Someone using the Virtual Office Phone
While on a call
1. Press the [Conf In] button.
2. Call the desired third party's number.
3. When the third party answers, the conference
will be in session.
From an Analog Phone - While on a call
1. Press [Flash] [7].
2. Call the desired third party's number.
When the third party answers, the conference
will be in session.
To Supervise Conference In from the Virtual Office Phone
While on a call
1. Press [Hold/New call] button.
2. Call the desired third party. Upon answering, announce the reason for the call.
3. Press [More] [Conf All 3] to connect the parties.
From an analog Phone - While on a call
1. Press [Flash] [1].
2. Call the desired third party. Upon answering, announce the reason for the call.
3. Press [Flash] [1] again to connect the parties.
21
01/16 11:43 PM 00:02:50
914085551212
Transfer
Hold/NewCall Drop Conf
Retrieve/Alternate
Conf In
More