Summary of Contents for Challenge 1500W High Pressure Washer
- Page 1 Instruction Manual Please keep for future reference 1500W High Pressure Washer Please read this instruction manual carefully before operating your pressure washer.
- Page 2 SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS Application • The pressure washer is applicable to DOMESTIC cleaning works e.g. Cars, Bicycles, Motorbikes, Caravans, Fences, Garden Walls, Pathways, Driveways ELECTRICAL SAFETY: Always check that the power supply corresponds and House facades, Removal of moss and algae, Brickwork and Guttering etc... to the voltage on the rating plate.
- Page 3 KNOW YOUR MACHINE KNOW YOUR MACHINE Description NOTE : Your Pressure Washer has been designed for outdoor use only for the cleaning of stone, wood, metal and plastic materials. A On/off switch. B High-pressure hose outlet. C Water supply inlet (garden hose and connectors not included).
- Page 4 OPERATING INSTRUCTION - ASSEMBLY OPERATING INSTRUCTION - ASSEMBLY Before carrying out any Connecting the High Pressure Hose assembly/disassembly of the unit please ensure that 1. Screw the fitting on High-Pressure the unit is unplugged from the Hose I onto the High Pressure electrical supply.
- Page 5 OPERATING INSTRUCTION OPERATING INSTRUCTION Operating your Pressure Washer Instructions for Use 1. Your spray lance has two main Spray Effect Front view of the Nozzle 1. Fully open the water mains tap - settings. These settings can be Do not at this point switch on varied by turning the fitting on the your pressure washer.
- Page 6 OPERATING INSTRUCTION CARE & MAINTENANCE Using the Detergent Dispenser WARNING : Always disconnect from Mains 1. Ensure that the Pressure Washer before carrying out any is switched off. maintenance task 2. You can only fix the Spray Lance J onto the Detergent Dispenser M fig.
- Page 7 CARE & MAINTENANCE TECHNICAL DATA Technical Data Recommendation of cleaning method Voltage 230-240V~ Max. pressure water supply 0.3 Mpa 1. Wash away any loose dirt by high pressure jet. Power input 1500W Water temperature 40ºC 2. Spray on the detergent and leave it for a few minutes for easy removal of fine Operating pressure 5.5 Mpa Degree of protection...
- Page 8 PROBLEM SOLVING ADDENDUM PROBLEM POSSIBLE CAUSE CORRECTION Cleaning the Nozzle - If the flow rate of water decreases, stops or the jet pressure fluctuates, the nozzle Machine does not start • Plug not connected. • Connect plug. may be blocked and it needs to be cleaned. •...
- Page 9 PRODUCT GUARANTEE This product is guaranteed against manufacturing defects for a period of THE DECLARATION OF Year COMFORMITY IS STILL MISSING, WE ARE WAIITNG FOR THE TEST RESULTS PROVIDED This product is guaranteed for twelve months from the date of original purchase. Any BY DRAGON.
- Page 10 IMPORTANT NOTICE 2 pieces of spare O-ring are provided below for repairing Assemble the pressure gun by screwing the spray lance onto your spray lance in case the sealing is damaged. Please the trigger gun carefully as illustrated in the Figure below. save these instructions and spare parts.
Need help?
Do you have a question about the 1500W High Pressure Washer and is the answer not in the manual?
Questions and answers
Why does trigger gun leak excessively
The trigger gun on the Challenge 1500W High Pressure Washer may leak excessively due to a blocked or squeezed inlet hose, clogged water filter, or loose hose connections. Check for leaks, straighten the hose, clean the filter, and ensure all connections are secure.
This answer is automatically generated