Table of Contents
Advertisement
About the Hard Disk
The FireLite XPress internal hard drive comes pre-formatted from the factory in FAT32
format.
Note: Capacity dependent on model. Your operating system and FireLite
XPress display may report capacity as fewer gigabytes. 1 GB =
1,000,000,000 bytes.
Your internal hard drive is a complex electronic storage system and should be handled
with care, as you might treat a sensitive portable computer or other state-of-the-art
consumer electronics product. Do not subject it to shock, high temperatures, or strong
magnetic fields.
Installing the Bundled Software on Your Computer
To begin the software installation, insert the included "FireLite XPress Installation CD"
into your CD-ROM Drive and follow the instructions on the screen for installing
FireLite XPress Notepad software and BounceBack Express backup software.
Operation
This section describes how to use FireLite XPress to store data and how to update its
display.
Connecting to a Computer
Connecting your unit to a USB Host device, such as a PC or Mac, is extremely simple.
Follow the steps below:
1.
Connect the mini-B end of the included USB cable to the USB connector on
FireLite XPress.
2.
Attach the other end of the USB cable to an available USB port on your PC,
Mac, or hub.
The drive will mount automatically and a drive letter representing FireLite XPress hard
disk will appear in My Computer (Windows) or a new icon will appear on the desktop
(Macintosh).
3
Advertisement
Table of Contents
