Advertisement
The new series is available with 2 different rigging systems: Touring (Metrix-t) and Installation (Metrix-i) versions.
Metrix-i introduces the EIR™ 'Enclosed Installation Rigging' system, which is a semi-permanent lightweight solution, designed for the
economically concerned customer.
Metrix-t features AIR™-the world's most convinient rigging system, familiar to many from the SpekTrix Line.
The powder coated aluminum Metrix Rigging Frame-t has a single moveable pick point, and comes with Standard with Metrix Stacking
Plates in order to attain 3 degrees of negative angle and all necessary push pins.
The powder coated Metrix-i Rigging Frame is made of Steel and It comes standard with a hanging bracket and all necessary hardware.
An Extended Metrix Stacking plate for attaining up to 13 degrees negative angle is also available.
The Metrix Symmetrical Adapter-t (Metrix is a 2-way asymmetric cabinet) One Metrix-t array can be flown upside down to match the
waveguide placement in the left and right arrays. In other words; all the waveguides are on the insides of the arrays, or all the waveguides are
on the outside of the arrays.
EIR™ plate for Metrix and Metrix W
Metrix User Manual Page 6 of 22
1.3
Rigging Options & Adapters
Metrix Rigging Frames:
Install version is made of steel, and touring version of light weight Aluminum
Screws for the EIR™ Plate come with
every EIR™ plate order.
Additional screws can be ordered.
The screw has a 6mm Hex Button
head
Advertisement
