Advertisement
technical specifications
DESCRIPTION
Provides high SPL extended bass to Adamson Metrix enclosures.
The Metrix Sub is equipped with two powerful ND15-S Kevlar Neo
low frequency drivers in a tuned, vented enclosure.
The cabinet is fully braced to minimize LF resonance and maximize
efficiency. In the Sub -t, four sets of captured precision-machined
aluminum rigging hardware retract into the cabinet body when
not in use; and four NL8 connectors (two front, two back) enable
easy cable loop-through regardless of the sub's orientation.
Metrix Sub Frame includes stacking plates for minus 3 degrees of
negative angle.
1401 Scugog Line 6, Port Perry,
Adamson Systems Engineering
ON L9L 1B2, Canada
t: [905] 982 0520 f: [905] 982 0609
www.adamsonsystems.com
info@adamsonsystems.com
PHYSICAL DATA
Dimensions & Weight
Height Front (cm) 24.41" (62)
Width (cm) 21.37" (54)
Depth (cm) 28.87" (73.3)
Weight (Kg) i - 117.5 lbs (53.2)
Box Shape
Box Finish
Hardware Finish
Protective grille
Horn Configuration
Cabinet Construction
Rigging
Accessories
TECHNICAL DATA
Frequency Response (+/-3dB)
Full Range Preset 40Hz - 160Hz
Frequency Range
with Xover Preset 35Hz - 110Hz
Maximum SPL (Continuous)
with Xover Preset 130.4dB
Maximum SPL (Peak)
Xover Preset 136.4dB
Sensitivity (2.83V @ 1m)
LF Section (Impedance Ω)
Power Handling
Connection Neutrik Speakon™ NL8
Processor Presets XTA, PLM, LAKE
Specifications are subject to change without notice.
t - 129.5lbs (58.7)
Rectangular
Textured Water Borne Acrylic
Polyester Sandtex™ Powder
14 Gauge cold steel
Fiberglass Waveguide
Rugged 11 ply 5/8" Baltic Birch
AIR™ (-t) / no rigging hardware (i)
Black powder coated aluminum
rigging frame (t) Steel rigging
frame (i), Install adapter plate,
Frame Link Plate, Wooden dolly,
Waterproof Soft covers
LF 104.5dB
ND-15 S 15" Kevlar Neodymium
Driver x 2 (6Ω)
(AES / Program / Peak)
2 x 500 / 1000 / 2000
connectors
Advertisement
