Kyocera DuraForce User Manual page 159

5. The message "Face captured." appears when the Face Unlock set up was successful.
Tap Continue.
6. You will be prompted to set up a backup lock. Select Pattern or PIN and set it up. See
Use Pattern or
To unlock the screen with Face Unlock:
► Turn on the phone and look at the front camera so that it recognizes you.

If it fails to recognize you, a backup lock screen appears. Enter a pattern or PIN to
unlock.
Use Pattern
1. Press >
2. Draw the screen unlock pattern by connecting at least four dots in a vertical, horizontal,
or diagonal direction. Lift your finger from the screen when finished.
3. The phone records the pattern. Tap Continue.
4. When prompted, draw the screen unlock pattern again and then tap Confirm.
5. You will be prompted to choose your backup PIN. See
To unlock the screen with Pattern:
► Draw the pattern on the locked screen.
Note: Clear the Make pattern visible check box if you do not want the unlock pattern to
display on the screen when you draw it.
Use PIN
1. Press >
2. Enter a PIN, tap Continue, re-enter your PIN, and tap OK to save the setting.
To unlock the screen with PIN:
► Enter the PIN and tap OK on the locked screen.
Use Password
1. Press >
2. Enter a password, tap Continue, enter your password again, and tap OK to save the
setting.
Settings
Use PIN.
> Settings > Lock screen > Screen lock > Pattern.
> Settings > Lock screen > Screen lock > PIN.
> Settings > Lock screen > Screen lock > Password.
Use PIN.
148