Inverting; Emergency Power Outage Directions - Teeter Hang Ups Power II Inversion Table Owner's Manual

INVERTING

Precautions:
• When first using the inversion table, do not go to full inversion. To start, invert to only 15-
20 degrees (see Figure 4)
angle. Refer to "Important Details Regarding Inverting" on the next page.
• Use a spotter for your first few inversion sessions until you are comfortable with the
operations of the table.
• This table requires hand cranking to an upright position in the event of a power outage
during use. (See "Emergency Power Outage Directions" below). PRACTICE manual
cranking to an upright position with a spotter until you are comfortable with the
procedure. Users who are not able to successfully hand crank to an upright position
should NEVER use the unit without a spotter.
How to Use:
• ENSURE there is clearance for the table to rotate without contacting other objects or
people.
• TO INVERT, push rotation control button in direction of your head.
• TO RETURN UPRIGHT, press rotation control button in direction of your feet.
Keep elbows clear of the Rear Frame when returning from the fully-inverted position in
order to avoid catching your arm between the Rear Frame and the table while the table
rotates. (See Figure 6)
upright position.

Emergency Power Outage Directions:

• If a power failure occurs, please remain calm.
• Reach for the emergency crank attached to the motor housing.
• Insert the emergency crank into the hole on the motor housing and turn the crank
clockwise to rotate the table upright.
Patent applies.
Teeter Hang Ups is a registered trademark of STL
®
International, Inc. and Inversion International, Ltd.
Specifications subject to change without notice.
© COPYRIGHT 2006, STL International, Inc. and
Inversion International, Ltd.
International Law Prohibits Any Copying, 01/06-3
Owner's Manual
until you feel comfortable enough to progress to a greater
Rest at the horizontal position for a moment prior to returning to
For information about the Teeter Hang Ups
or if you have any problems assembling the equipment or questions about its use, please contact
Customer Service at the appropriate location below:
USA & Canada:
STL International, Inc.
9902 162 nd St. Ct. E.
Puyallup, WA 98375
(Phone) 800-847-0143
(Fax) 800-847-0188
(email) Sales@STLIntl.com
(web) www.STLIntl.com
(See Figure 5)
(See Figure 7)
2-year warranty, to order replacement labels or manuals,
®
International:
Inversion International, Ltd.
PO Box: AP 59245
New Providence Island, Bahamas
(Phone) +1-242-362-1001
(Fax) +1-242-362-1002
(email) Info@InversionInternational.com
(web) www.InversionInternational.com
Figure 4
Figure 5
Figure 6
Figure 7
Europe:
Teeter Ltd.
Cygnet House, Sydenham Road
Croydon, Surrey CR0 2EE
United Kingdom
(Phone) +44-20-8667-0060
(Fax) +44-20-8680-3999
(email) mail@TeeterLtd.com
(web) www.TeeterLtd.com
II-L256 Pg. 3