Table of Contents
Advertisement
By Host panel(Keypad): 【ESC + master code + ENT 】 →the host will beep twice to successfully complete the operation
5. Emergency: By wireless remote: Press Emergency key and the host will alarm immediately;
By host panel(Keypad): press "
6. Telephone alarm: After receiving the call, you will hear the recorded voice message immediately, it can be played for 30 seconds
repeatedly, then follow the below instruction:
6.1. Input "8" to enter into the listening status for 20 seconds automatically, you can hear the alarming event sounds
6.2. Input"#" to play the recorded voice message for one time automatically
6.3. Input "*", the host will end the call and stop dialing any auto dialer#.
6.4.
7. SMS reporting: Mobile will get SMS like " System Alarming XX, YYYY", "XX" means zone number, "YYYY" means the detailed sensor.
8. Arm remotely by phone: 30 seconds after successfully dial the telephone number of host, enter the password of host after the
9. Disarm remotely by phone: 30 seconds after successfully dial the telephone number of host, enter the password of host after the
10. Arm by SMS: You can edit SMS " XXXXXXBF" to host panel, the host panel would arm automatically when getting this SMS, and
also will message back to mobile "Arm successfully".
Notes: Arm by SMS is only for "Armed away"!
11. Disarm by SMS: You can edit SMS " XXXXXXCF" to host panel, the host panel would disarm automatically when getting this SMS,
and also will message back to mobile "Disarm successfully".
Monitoring of door/window status: When the smart zone is ON, the arm operation is normal if all the doors or windows
12.
are closed. But if any door or window is open, the host will sounds "Di Di Di" and at the same time it has below
displays alternately:
"XX": zone number；
"YYYYY": sensor name；
Note: 1. This function is available only with wireless intelligent door sensor programmed.
2. If arm by SMS or phone call, the operation is same as original.
3. If arm by remote controller or wireless keypad, it will arm successfully after two succsessive arm operation.
13. Wireless "Ding Dong" doorbell: the alarm host will sounds "Ding Dong" three times after each press of the doorbell button.
Note: This is an optional function. To have this function, need to add and program a wireless doorbell button.
5．Operation notice
1.
Alarm processing mode: immediately after the system alarms, it starts to dial (or send SMS) in sequence from the 1st
group number to the 5
times, the answered number (or the number which received the SMS) will not dial (or send SMS) repeatedly.
Exit delay alert: the alarm host sounds "Di" every 1 second (door/window is closed) within preset exit delay time.
2.
Alarm delay alert: the alarm host sounds "Di" every 1 second within preset alarm delay time.
3.
4.
Alarm priority: A. If the alarm host‟s own telephone line is accupied when it is alarming, it will cut it and make it
unoccupied, at the same time dial out to report alarm event.
External power supply cut alert: the alarm host sounds "Di" every 8 seconds.
5.
6.
Telephone cable disconnection alarm: the alarm host goes off when telephone cable is disconnected, after 5 seconds
alarm, it will sounds "Di Di Di" every 8 seconds.
7.
Lower voltage alert: the alarm host sounds"Di Di Di" every 8 seconds when power gets very low.
", and the host will alarm immediately.
from phone. Each extra press of "8" can prolong 20 second listening in.
Directly hang off the telephone, the host will end the call and automatically dial the next auto dialer#.
beep---enter 1 after beep—the host will automatically hang up after beep to successfully complete the
operation.
Notes: You can set "Armed Away" remotely by phone, but keep notes that you can‟t set "Armed Home" by
this way.
beep---enter 0 after beep—the host will automatically hang up after beep to successfully complete the
operation.
th
group number(skip empty numbers) automatically. It dials (or send SMS ) circularly for three
B. The alarm host‟s "Ding Dong" sound will switch to alarm sound and dial to report if it receives
alarms signal when sounds "Ding Dong" .
Not Ready
Arm Anyway
Y N
XX YYYYY
Arm Anyway
Y N
Advertisement
Table of Contents
