Hi-Tech GSM+PSTN Touch Screen Wireless Alarm System User Manual page 11

 Service life: ≤1 year
 Monitoring range: 20m
How to program
Please refer to the descriptions of 【Program Sensor】or Table 6.
Note:

You can only add 1 wireless smoke alarm each time, totally 4 available to be added.

Each serial number is available to study 1 wireless smoke alarm, the latter configured wireless smoke
sensor will be workable and the former one becomes not workable automatically.
Wireless outdoor siren
Features:

Nice, exquisite and waterproof

Mico-computer controlling, steady performance and high-class quality

Study to at most 10 pcs of wireless alarm host

With inbuilt charging circuit and back up accumulators, automatic AC power and DC power transformation

Low standby power consumption, self-inspection of lower battery voltage, automatic charging

Wall hanging installtion
Specifications：

Operating power：110~240VAC, 50Hz
 Static power consumption：≤40 mA
 Working power consumption：≤450 mA

The maximum alarm sound with flash：
3 Minutes

Receiving distance：≥100M（In open area）

Alarming volume：≥105db
Installation and usage
 Press down the green power switch on the back after connecting to the AC power
 Study the siren to the alarm host according to the instruction below
 Unplug from the AC power, fix it in the proper outdoor place with handing hook, and then plug to the AC power
 The max time for alarming sound with flash is 3 minutes, it will stop automatically after the alarm host is disarmed
 When the back-up battery has a lower voltage than 5VDC, the charging indicator turns on, the back-up accumulators
will be charged automatically, the approximate charging time is 20 hours, when the charging indicator off, it means it
has finished charging
How to program
Activate

(Siren) connect the siren to power by plugging in to the socket------ press red studying switch on the back, siren lights
on

(Alarm host) Press
programming password---ENT)---you will hear "DIDI" from the alarm host after 5 seconds
 One siren can be studied to at most 10 wireless alarm hosts, multi wireless sirens are available to be added for each
alarm host.
Deactivate
 Keep pressing the red button for 10 seconds and a successful deactivation will be followed by a flash of the alarming
light
Note：all the alarm hosts will become invalid to this siren after this operation
Wireless doorbell button
Features
Installed in the entrance, the alarm host will sounds "Ding Dong" if someone press it.
Specifications：
on the alarm host to let the alarm host goes off------ Let it stop alarming ( -----Input