Brother KG-88 Service Manual page 15

Disassembling the G carriage
69
• Removing the stitch cam guide plate assembly
(68) Remove the screw and washer for the stitch dial.
(69) Remove the two screws A for the stitch guide cam plate.
(70) Remove the two screws B for the stitch guide cam plate.
(71) Remove the needle guide plate by loosening the two screws.
(72) Open the G carriage foot assembly and remove the stitch cam
guide plate.
• Removing the following parts
(73) The connecting plate, the direction change plate R
&
L and
spring comes off at the same time.
(74) Remove the G carriage foot.
Names of Parts
~
Screw/washer for stitch
dial
§
Screw A for stitch cam
guide plate (2 pes.)
~
Screw B for stitch cam
guide plate (2 pes.)
Needle guide plate
Screw for needle guide
plate (2 pes.)
Stitch cam guide plate
Connecting plate
Direction change
plateR
Direction change
plate L
Spring for connecting
plate
~ G carriage foot
@ Latch stopper brush
Screw for latch stopper
brush (2 pes.)
®
Arm for needle
operation
(]], Stitch dial lever
RoUer and spring
®
Stitch dial
Stitch dial lever/screw
• Removing the latch stopper brush
(75) Remove the latch stopper brush by loosening the screw.
(76) Remove the arm for needle operation.
• Removing the stitch dial lever
_ t'l _
(77) Open the cover for the stitch dial lever and remove the spring
and the roller.
(78) Pull out the stitch dial and remove the screw and the stitch
dial lever.