radio
LISTENING TO rADIO
remote Control
1.
Press the TUNEr button to select the FM band.
.
Tune in to the desired station.
~
~
~
Main Unit
1.
Press the FUNCTION button to select the FM band.
.
Select a broadcast station.
~
~
~
Press the MO/ST button to listen in Mono/Stereo.
• Each time the button is pressed, the sound switches between STErEO and MONO.
• In a poor reception area, select MONO for a clear, interference-free broadcast.
PrESETTING STATIONS
Example : Presetting FM 89.10 in the memory
1.
Press the TUNEr button to select the FM band.
Press the , , . button to select 89.10.
.
.
Press the TUNEr MEMOrY button.
4.
Press the [,] button to select preset number.
~
. Press the TUNEr MEMOrY button again.
. To preset another station, repeat steps 2 to 5.
~
Downloaded From TheatreSystem-Manual.com Manuals
Automatic Tuning 1 : When the [,] button is
pressed, a preset broadcast station is selected.
Automatic Tuning 2 : Press and hold the , , . button
to automatically search for active broadcasting
stations.
Manual Tuning : Briefl y press the , , . button to
increase or decrease the frequency incrementally.
Automatic Tuning 1 : Press the STOP
button to select the preset station.
Automatic Tuning 2 : Press the STOP
the [,] button to automatically search the band.
Manual Tuning : Press the STOP
the
button to tune in to a lower or higher frequency.
You can select between 1 and 15 presets.
To tune in to a preset station, press the [,] button
on the remote control to select a channel.
(T)
button to select PrESET and then press the [,]
(T)
button to select MANUAL and then press and hold
(T)
button to select MANUAL and then briefl y press