Samsung HT-Z210 User Manual page 26

connections
METHOD 3 : Scart
If your television is equipped with a SCART input, connect a SCART (not supplied) from the AV OUT
jack on the back panel of the main unit to the SCART IN jack on your television.
1. With the main unit turned off, press and hold the Number 8 (COMPONENT SEL.) button on the
remote control for over 5 seconds.
~
.
Press the Number 8 (COMPONENT SEL.) button shortly to select <RGB> to set SCART mode.
VIDEO SELECT Function
Press and hold the Number 0 (VIDEO SEL.) button on the remote control for over 5 seconds.
<COMPOSITE> or <RGB> will appear in the display. At this time, press the Number 0 (VIDEO SEL.)
~
button shortly to select between <COMPOSITE> and <RGB>.
If Scart (RGB Input) is equipped for your TV, press the Number 0 (VIDEO SEL.) button to select RGB
~
mode.
You can get a better picture quality by using Scart setting.
~ If Scart (RGB Input) is not equipped for your TV, press the Number 0 (VIDEO SEL.) button to select
COMPOSITE mode.
METHOD 4 : Composite Video
Connect the supplied Video cable from the VIDEO OUT jack on the back of the DVD Player to the
VIDEO IN jack on your TV.
M

Downloaded From TheatreSystem-Manual.com Manuals
<Y Pb Pr> or <RGB> will appear in the display.
`
Resolutions available for the HDMI output are 480p, 576p, 720p,1080i/1080p.
`
This product operates in Interlace scan mode (576i, 480i) for component output.
`
If you use an HDMI cable to connect a Samsung TV to the DVD Player, you can operate the Home
Cinema using the TV's remote control. This is only available with SAMSUNG TVs that support
Anynet+(HDMI-CEC).
`
Please check the logo (If your TV has an logo, then it supports the Anynet+ function.)