before using your home cinema
The DVD Home Cinema's remote can be used to control Samsung TVs.
1.
Plug the main unit's power cord into the AC power supply.
.
Press the DVD rECEIVEr button to operate the DVD Home
Cinema.
.
Press the FUNCTION button on the main unit or DVD button
on the remote to enable DVD/CD playback.
4.
Press the TV button to set the remote to TV mode.
.
Press the POWEr button to turn on your Samsung TV
with this remote.
.
Press the TV/VIDEO button to select VIDEO mode
on your TV.
Selecting the Video Format
Press and hold the Number 7 button on the remote controller for over 5 seconds while the
power is turned off.
By default, the video format is set to "PAL".
~
~
"NTSC" or "PAL" will appear in the display. At this time, press the
Number 7 button shortly to select between "NTSC" and "PAL".
Each country has a different video format standard.
~
For normal playback, the video format of the disc must be the same
~
as the video format of your TV.
Downloaded From TheatreSystem-Manual.com Manuals
VIDEO