Table of Contents
Advertisement
Registering Optional Cordless Handsets
Registration is necessary for cordless handsets. You can register up to 8
cordless handsets at the base unit. The model number of the optional
cordless handset is KX-TGA200CB.
The included cordless handset is pre-registered at the factory and
assigned the handset number 1. The handset number is used as the
extension number (p. 34, 63). Optional handsets must be registered at the
base unit. Only one handset can be registered at a time.
Make sure that the base unit and cordless handset are in the standby
mode. Registration must be completed within 1 minute.
1
Base unit:
Press
(FUNCTION)
2
Press
or
points to "Registration", and
press H.
3
Press
or
points to "HS registration",
and press H.
H a n d s e t
r e g i s t e r i n g
4
Cordless handset:
Press
(FUNCTION)
5
Press
or
points to "Registration", and
press H.
6
While "HS registration" is
at the arrow, press H.
Handset
registering
.
until the arrow
until the arrow
.
until the arrow
Base Unit & Handset
7
Base unit/cordless handset:
Wait until a beep sounds on the
base unit and handset and until
both of the displays show the
assigned handset number.
Ex. Handset number is 2.
Base Unit
Handset2
registered
Cordless Handset
Handset2
registered
• To return to the standby mode,
press (EXIT).
• The handset number ([1] to [8]) will
be displayed on the handset.
You can store a PIN (Personal
Identification Number) to prevent
unauthorized persons from registering
and using a cordless handset (p. 57).
Once the PIN is set, you must enter
the PIN at registration (p. 58). If you
forget your PIN, please refer to
"Clearing Settings" (p. 92).
21
Advertisement
Table of Contents
