Installation Of The Appliance; Description Of Functions; Setting The Clock; Setting 12-Hour-Mode - Bifinett KH 1106 Operating Instructions Manual

Installation of the appliance

• Choose an even surface with enough space
for the ventilation of the appliance.
• Keep a distance at least 7.5 cm between the
appliance and the adjacent walls. Make sure
that the door of the microwave oven can be
easily opened.
• Make sure that the power plug is easily acces-
sible and can be reached and disconnected
in emergencies or dangerous situations.
• Keep a gap at least 30 cm free above the
microwave.
• Do not remove the feet underneath the
micorwave.
• Do not block air supply and exhaust openings.
Otherwise the appliance may be damaged.
• Install the appliance as far away as possible
from radios and televisions. The operation of
the microwave oven can cause malfunctions
of radio and television reception.
• Connect the appliance to a standard house-
hold wall socket. Make sure that the voltage
and frequency ratings correspond to the details
stated on the rated power label.
Important! Do not install the microwave above
a cooker or other appliance generating heat.
Installation in such a location could lead to
damage to the appliance and the loss of
warranty.
• Remove packaging material and any protective
film on the surface of the casing.
Note: Do not remove the light grey flimmer
cover plate, which is mounted in the cooking
area to protect the magnetron.

Description of functions

Setting the clock

After inserting the mains plug into the socket and
powering on, open the microwave door once. The
LED display reads „0:00". The oven emits an
acoustic signal and goes into standby mode.

Setting 12-hour-mode

1. Press button d
symbol appears on the LED display
and 12-hour-mode is indicated via „12 H".
2. Turn the dial a
3. Now press the button
display changes over to the minutes setting.
4. Turn the dial a
5. To finish press the button
following display flashes in the LED display „:"
indicating that the „Set clock" process has
been successfully completed.

Setting 24-hour-mode

1. Press button d
symbol appears on the LED display
and 24-hour-mode is indicated via „24 H".
2. Turn the dial a
3. Now press the button
and the display changes over to the minutes
setting.
4. Turn the dial a
5. To finish press the button
save". The following display flashes in the
LED display „:" indicating that the „Set clock"
process has been successfully completed.
Note: If you press the button „Cancel/Stop"
the appliance automatically changes back to
its previous status.
- 9 -
„Clock" once. A red clock
to set the hours.
d „Clock" and the
to set the minutes.
d „Clock". The
„Clock" twice. A red clock
to set the hours.
d „Clock"
to set the minutes.
d „Clock/energy
i ,