Operating voltage: 220 - 240 V ~ 50 Hz Light source: 6,5 V ~ 70 mA (= 0,455 W) Power consumption: KH4218 = 100.8 W KH4219 = 84 W KH4220 = 134.4 W KH4221 = 67.2 W KH4222 = 100.8 W KH4223 = 117.6 W...
Page 3
• When using the illuminated figure out- doors, use only a power socket that is protected by a fault current circuit break- er (FI or RCD) with a maximum residual current of 30mA. • The illuminated figure is protected against spray water (IP44).
Setting up the illuminated Figure Take the Illuminated Figure from its packaging. Remove all transportation fasteners and tapes/foils. Place the Illuminated Figure on a suitable surface. Carefully pull the two wire elements apart, on the Christmas tree figure (KH4222) and the Snowman figure (KH4220), so that the figures can stand alone.
Your statutory rights are not restricted in any way by this warranty. DES Ltd Tel.: 0870/787-6177 Fax: 0870/787-6168 e-mail: support.uk@kompernass.com Kompernass Service Ireland Tel: 1850 930 412 (0,082 EUR/Min.) Standard call rates apply. Mobile operators may vary. e-mail: support.ie@kompernass.com - 4 -...
This manual is also suitable for:
Kh4220Kh4219Kh4221Kh4222Kh4223Kh 4218 3d-illuminated christmas decoration...
Show all
Need help?
Do you have a question about the KH4218 and is the answer not in the manual?
Questions and answers