Hard Drive Assembly - Macpower & Tytech The Bermuda User Manual & Installation Manual

The hard drive
jumper settings
should be master or
factory default.
Be careful not to
damage any cables
or components and
double check the
connection between
the cables, the
bridge board and
your hard drive
before you close up
the case.
Copyright © 2000-2003 by Macpower Peripherals Ltd. - www.macpower.com.tw

Hard Drive Assembly

Connect the ATA cable and the power line to your hard drive.
Install the hard drive and fasten the screws. Align the plastic
cover with the body, push it gently into place and fasten the
screws. Mount the stand and connect your power adapter plus
interface cable.
- 5 -