Advertisement
electric Fireplace Installation
This mantel can be used with DESA Heating, LLC electric
fireplaces. Electric fireplaces install from the front of mantel.
To install electric fireplace see fireplace instruction manual.
Vertical support Installation
Install vertical support (see Figure 7).
Top
Center
Support
Vertical
Support
#11
Base Support #10
Figure 7 - Installing Vertical Support
1
1
/
" Screws
4
1
/
" Screws
1
4
mANTel INsTAllATION
1. Carefully push mantel and base into position in corner
and flush against both walls. Check operation of fireplace
before proceeding.
2. Place right trim strip on right side of top and left trim on left
side of top. Align both pieces so any gaps between mantel
and wall are covered as well as possible and front of trim
strips are flush with side of top. With one person holding
trim strips in place, nail each strip to mantle using finishing
nails included in hardware kit and nail set.
Trim Strips
DESA Heating, LLC
2701 Industrial Drive
Bowling Green, KY 42101
www.desatech.com
1-866-672-6040
123754 01
NOT A UPC
Figure 8 - Installing mantel trim
Finishing Nails
123754-01
Rev. A
04/08
Advertisement
