Table of Contents
Advertisement
26
Turning the instrument on
Turning the instrument on and viewing the main screen
Turning the instrument on
First of all, turn the instrument on and familiarize with the main screen. You can also listen to the
demos.
Turning the instrument on and viewing the main screen
1
Turn Pa300 on (exit from standby) by pressing the POWER button located in the control
panel.
After you turn the instrument on, a welcome screen is shown for some seconds, then the main
display appears.
2
When you want to put Pa300 to standby, keep the POWER button pressed for about
one second, and release it when the screen appears dimmed.
After having pressed the POWER button, the display brightness will be dimmed. At this point,
the shutdown procedure will begin and last for a few seconds. Please do not disconnect the
power cable during this procedure.
Display
Power button
Hide quick links:
Advertisement
Table of Contents
