Installation; Operation; Pressure Adjustments - DeWalt DPD3800 Instruction Manual

WARNING: RISk Of INjURy fROm lIfTING
What can haPPen
• Serious injury can result
from attempting to lift too
heavy an object.
SAvE ThESE InSTrucTIonS
For FuTurE uSE

InSTALLATIon

Pressure Washer Assembly (Fig. 1)
1. Place handle assembly (O) onto frame, depress
the snap buttons, and slide the handle assembly
onto the frame (F) until snap buttons are secured
in place.
CAUTION: Risk of personal injury. Avoid placing
hands between handle and frame when assembling
to prevent pinching.
2. Attach high-pressure
hose (P) to spray gun.
Make sure it is
secure.
3. Connect wand (E) to
spray gun. Make sure
connection is secure.
hoW to PreVent It
• The pressure washer is too
heavy to be lifted by one
person. Obtain assistance
from others before lifting.
O
F
P
E
4. Thread the side handle (D) into spray
gun extension and tighten to desired
position.
5. Place the nozzle holder (B) onto the
panel assembly (A) and push each
nozzle holder into place.
6. Remove the five colored quick-connect
nozzles from the
plastic bag and insert
them into correct
grommet on the
nozzle holder.
A
Nozzles are color
coded to match colored nozzles on panel assembly.
note: The high-pressure pump was filled with oil at the factory.
Always check oil level before using (refer to Maintenance for more
information).
WARNING: Risk of bursting. Use a tire pressure gauge to check the
tires pressure before each use and while inflating tires; see the tire side-
wall for the correct tire pressure.
note: Air tanks, compressors and similar equipment used to inflate
tires can fill small tires similar to these very rapidly. Adjust pressure
regulator on air supply to no more than the rating of the tire pressure.
Add air in small increments and frequently use the tire gauge to
prevent over inflation.

oPErATIon

Pressure Adjustments

The pressure setting is preset at the factory to achieve op ti mum pres-
sure and cleaning. To lower the pres sure, follow these instructions.
10
D
B