” COMPACT Air TWiN HAMMEr iMPACT WrENCH 94802 ASSEMBLY ANd OPErATiNG iNSTrUCTiONS Due to continuing improvements, actual product may differ slightly from the product described herein. ® 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com...
Keep proper footing and balance at all times. Do not reach over or across running machines or air hoses. SKU 94802 For technical questions, please call 1-800-444-3353 Page 2...
Page 3
21. This impact Wrench should only be used with impact sockets and extensions. Using any other accessories can cause the accessories to break, causing permanent damage to the unit and severe injury to the operator, property, or bystanders. SKU 94802 For technical questions, please call 1-800-444-3353 Page 3...
Set the air pressure on the regulator to 90 PSI. do not exceed the recommended air pressure of 90 PSi. Check the air connection for leaks. Disconnect from the air source. SKU 94802 For technical questions, please call 1-800-444-3353 Page 4...
Page 5
Use other appropriate methods and tools to loosen the nut. When the nut is loosened, release the Trigger (20). Turn off the air compressor and disconnect the hose. If needed, remove the nut from the socket. SKU 94802 For technical questions, please call 1-800-444-3353 Page 5...
Air Inlet (31) Forward Reverse FiGUrE 2 Turn the Regulator Knob (45) for more air flow and more power. Turn the Knob to the right for Forward; turn left for Reverse. SKU 94802 For technical questions, please call 1-800-444-3353 Page 6...
OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. NOTE: Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts. SKU 94802 For technical questions, please call 1-800-444-3353 Page 7...
Need help?
Do you have a question about the 94802 and is the answer not in the manual?
Questions and answers