Sanyo PDG-DXL100 Service Manual page 46

2. Net�ork Setting
(1) Open the "Local area connection", (1) Open the "Local area connection", "Local area connection", Local area connection", ", ,
choose "properties". "properties". properties". ". .
(2) Select "Internet protocol (TCP/IP)", then
click "Properties".
(3) Modify the IP address to 192.168.0.99, and modify
Subnet mask to 255.255.255.0.
Note: - The HOST ID (192.168.0.XXX) of PC
IP address must be different from the
projector IP address written down in step 1
of 4-11-1.
(4) Click "OK".
PDG-DXL100 Confidential
4-13