Setup - System - TC-Helicon Voicelive Play User Manual

Harmony & effects for singers
Hide thumbs Also See for Voicelive Play:
Table of Contents

Advertisement

Setup - System

LCD Contrast
– Controls the contrast of the LCD screen. Depending on the ambient light in the
room, different settings may have more or less effect .
UP/DN Function
1 .
LOOPING – Enters LOOP mode
2 .
SET KEY – Enters KEY/SCALE mode
Lead Dly
– Delays the incoming vocal signal very slightly to compensate for the small amount of
latency introduced when effects are processed by the system. This delaying of the signal allows the
output voices, like harmonies, to be perfectly in sync with the lead vocal.
There are 3 settings:
1 .
OFF – No delay compensation is used .
2 .
VOICE SYNC – The lead vocal is delayed an amount equal to the maximum latency of the sys-
tem with all effects turned ON .
3.
AUTO – The lead vocal will be delayed by an amount equal to the latency of the currently
enabled effect blocks. Using more effect blocks will increase the latency compensation amount.
Tune Reference
– Default is 440Hz and can be changed in 0.5Hz increments.
Pitch Pipe Level
– Set the behavior of pressing the UP/DN footswitches simultaneously.
– Controls the level of the Pitch Pipe in the Practice screen .
18

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents