NGM WeMove Wilco Quick Manual page 23

Set up
Installing the USIM cards:
number, PIN code, carrier services numbers, contacts and other important
access the USIM slots, turn off the phone, take off the back cover by lifting it up from the
bottom, and remove the
slots; follow the illustration. Slot 1 supports WCDMA.
Installing the memory card: In order to use all functions of NGM WeMove Wilco, it is
advisable to install a micro-SD
phone, after removing the back cover and the battery; SD card slot is placed right to the
USIM slots, upward the battery area. Slide in the memory card so that the gold contacts are
turned downwards.
D
Slot 1: USIM1(UMTS or GSM)
Slot 2: USIM2 (GSM)
Warning: before removing the back
cover, make sure that nothing
(such as earphones or a USB cable)
is plugged into the phone.
The USIM card stores information as your personal phone
battery. Insert your USIM cards simply by sliding them into their
card: the card has to be inserted in the back side of the
Warning: insert USIM and SD Cards only after
removing the battery, in order to prevent data loss.
details.
Slot micro SD
ENGLISH
To
23