Alarm Functions; General Operation; Headphones; Care And Maintenance - Technika DAB1101ST Owner's Handbook Manual

TIME ANd dATE FuNCTIONS
NOTE: when powered with batteries the display will dim
after 40 seconds of inactivity, to activate again press any
button. This does not occur when using mains power.

ALARM FuNCTIONS

1. Press and hold the INFO/MENU button for 3 seconds.
2. When the <Scan setting> option appears press either
or and find <System>.
3. Press the ENTER button, use the / buttons to find
<Alarm> and press ENTER.
Alarm Setup
Press the ENTER button to initiate the setup process.
1. Use the / buttons to select Alarm ON or OFF then
press ENTER to activate.
2. Use the / buttons to set the Alarm ON hour digits.
Press ENTER to set.
3. Set the Minute digits the same way and press ENTER
once set.
4. Choose the source of the alarm between BUZZER, DAB &
FM using the / buttons.
If you choose DAB or FM the next step is to choose the
station you want to play when the alarm sounds.
There is a choice of Last station listened to, or a preset
( if any stored ).
or retailer for recycling advice.
ALARM FuNCTIONS
5. There is the option to only have the alarm activate on
WEEKDAYS, DAILY, ONCE and WEEKENDS. Choose which
you require using the / buttons. The ENTER button
stores the setting.
6. The next step is to set the volume level you require. use
the / buttons to set and press ENTER to activate the
alarm.
7. To disable the alarm return to the <Alarm> screen and
use the / buttons to choose OFF and press ENTER
to save.
8. To silence the alarm when sounding press the ENTER
button.
NOTE: In standby the alarm icon will display when
activated.
Snooze Mode
When the alarm sounds ( if in BUZZER mode ) you can press
the SLEEP / button to activate the SNOOZE mode and
delay the alarm for 5 minutes.

gENERAL OPERATION

Factory Reset
To reset the radio to the factory settings follow the below
steps. NOTE All preset settings will be lost.
1. Press and hold the INFO/MENU button for 3 seconds.
8
gENERAL OPERATION
2. When the <Scan setting> option appears press either
or and find <System>, press the ENTER button.
3. Use the or buttons to find the <Factory Reset>
option and press ENTER.
4. Choose <Yes> and press the ENTER button.

hEAdPhONES

There is a headphone output socket on the back panel of
the radio. If headphones are connected to this socket for
private listening, the speakers will cut out automatically.
Always keep the volume within reasonable limits to avoid
damaging your hearing. WARNING! Excessive sound
pressure can cause hearing loss. With continued use at
high volume, your ears may become accustomed to the
sound level, which may result in permanent damage to
your hearing.

CARE ANd MAINTENANCE

AFTER USING YOUR RADIO
• Set to Standby.
• Switch the unit off at the mains and unplug it if you are
leaving it unattended for a long period (holidays etc).
• Avoid leaving batteries fitted if you leave the radio
unattended for long periods. They may leak and damage
the radio.