Fm Operation - Technika DAB1101ST Owner's Handbook Manual

dAb OPERATION
Manual Tuning
As well as an auto tune function, you can manually tune
the receiver. This can help you when aligning your aerial or
when adding stations that were missed while auto tuning.
1. Press and hold the INFO/MENU button for 3 seconds.
2. When <Autoscan> appears press the button to select
<Manual Tune>, press the ENTER button.
3. Use the / buttons to cycle through the DAB
channels, which are numbered from 5A to 13F.
4. Now press the ENTER button to enter the current
ensemble/multiplex, the top line will now display the
first station in the ensemble/multiplex.
5. To see what stations are present in the found ensemble/
multiplex, just press either or buttons. When you've
located a station that you would like to listen to, just
press the ENTER button
6. Once you have reached the last station in the found
ensemble, it will revert back to the first station again. If
you wish to exit the manual tuning mode, just press the
ENTER button.
Pruning
When the radio has performed a Scan in several locations
you may find there are stored stations that you can no
longer receive. This function automatically removes them
from the stored station list.
dAb OPERATION
1. Press and hold the INFO/MENU button for 3 seconds.
2. When the <Autoscan> option appears press either
or and find <Prune>, press the ENTER button.
3. Use the or buttons to select YES or NO and press
ENTER to select.
DRC ( Dynamic Range Control )
This causes the radio to reduce the dynamic range of
the audio signal. The purpose of this is to adapt the
dynamic range of the audio signal to listening in a noisy
environment.
NOTE: The Dynamic Range Control option is not available
on many DAB stations.
1. Press and hold the INFO/MENU button for 3 seconds.
2. When the <Autoscan> option appears press either
or and find <DRC>, press the ENTER button.
3. Choose between DRC off, DRC Low and DRC High.
4. Press ENTER to save the setting.
6

FM OPERATION

Switching from DAB to FM
Press the DAB/FM button once to switch. The display will
show FM Mode.
Once activated the radio will automatically tune to the
nearest available station.
Storing stations
The operation for FM is the same as DAB. See Page 5.
Recalling a stored station
The operation for FM is the same as DAB. See Page 5.
Display modes
Every time you press the "INFO/MENU" button, the
display will cycle through the following display modes:
The information is displayed on the lower segment of the LCD
display.
<Programme Type> Time
Date
<Programme Name>
Radio text
Audio Mode (Stereo/Mono)
Program type
This describes the "Style" or "genre" of music that is
being broadcast e.g. "Rock "or "Classical".
Programme Name
Station name ( if broadcast ). Frequency of the station if no
name is broadcast.