Table of Contents
Advertisement
ALARM FUNCTIONS
Your radio includes a dual alarm function. The two alarms,
ALARM 1 and ALARM 2 can be set with different wake-up
times, then you can set either or both alarms to wake you. You
can also choose to be woken by a beep sound, a DAB station
preset or an FM station preset. Before using the alarms, you
must store your preferred wake-up settings.
STORING PREFERRED WAKE-UP SETTINGS:
•
Press and
hold the ALARM 1 or ALARM 2 button to
choose the alarm you want to set.
The display will confirm which alarm (ALARM 1 or ALARM 2)
you selected. The alarm time will be shown with the hours digits
flashing.
•
Turn the
VOLUME SELECT control to set the hours digits.
JOG MODE/SELECT button to confirm the hours
•
Press the
setting.
The minutes digits will flash.
VOLUME SELECT control to set the minutes
•
Turn the
digits.
JOG MODE/SELECT button to confirm the
•
Press the
minutes setting.
The display will now show a DAB preset number .
•
Turn the
VOLUME/SELECT control to choose a DAB preset
station to wake to.
•
Press the
JOG MODE/SELECT button to confirm.
The display will now show an FM preset number .
•
Turn the
VOLUME/SELECT control to choose an FM preset
station to wake to.
•
Press the
JOG MODE/SELECT button to confirm.
The display will now show a buzzer tone number.
•
Turn the
VOLUME/SELECT control to choose from buzzer
tone 1 or 2 for this alarm.
•
Press the
JOG MODE/SELECT button to confirm.
NOTE:- Refer to the previous page (STATION PRESETS) for
information on how to store preset stations. If you choose an
unassigned 'free' preset number in error, the alarm will default
to the BEEP wake-up setting.
The display will now show the legend 'VOLUME' .
VOLUME/SELECT control to choose your
•
Turn the
preferred wake-up volume level.
•
Press the
JOG MODE/SELECT button to confirm the
wake-up volume setting.
NOTE:- Ensure that the wake-up volume settings are set at a
high enough level to wake you.
ACTIVATING THE ALARMS:
Once you have stored your preferred wake-up settings, you can
activate either or both of the alarms to wake you.
To activate your chosen alarm:
•
Press the
ALARM 1 or ALARM 2 button repeatedly to
cycle through the wake up options you can choose from
the list as shown below-
•
Set the radio to Standby before going to sleep.
NOTE:- The above examples show DAB preset 3, FM preset 1
and Buzzer tone 1 as preferred wake-up settings.
8
If either of the alarms have been set to wake you, the ALARM
symbols will be displayed in the position shown below.
Alarm symbol position
The three symbols are shown below, indicating which alarm
is set.
Alarm 1 set
Alarm 2 set
Alarms 1 & 2 set
WHEN THE ALARM SOUNDS
The alarm will continue to sound for one hour before switching
off automatically.
To switch off the alarm before this time
•
Press the
ALARM 1 or ALARM 2 button to switch off the
alarm that is sounding.
To extend the alarm for a further 5 minute 'snooze' .
SNOOZE button to switch off the alarm that is
•
Press the
sounding.
The alarm will switch off for a 5 minute period, and the 'z' symbol
will show on the display to indicate 'snooze' mode.
NOTE:- The snooze function can be selected repeatedly until
the alarm switches off after one hour.
Snooze
symbol
Advertisement
Table of Contents
